Machine Scope
200T + 300T
Focused on small-to-medium aluminum die casting parts only
HSX product range
Products for Global Wholesalers & OEM Buyers
HSX DIECASTING supplies OEM small-to-medium aluminum die casting parts, custom aluminum hardware parts, automotive LED lights, motorcycle LED lights, LED work lights, and decorative brake caliper covers. The product scope stays inside realistic 200T and 300T aluminum die casting capacity for compact housings, brackets, covers, shells, and other practical OEM components.
OEM Input
Drawings + Samples
Custom manufacturing accepted from buyer drawings, samples, or project requirements
Product Mix
Parts + LED Lights
Built for wholesale, aftermarket, and OEM sourcing programs
Realistic scope
Small-to-medium aluminum parts only
Typical products
Compact housings, lamp bodies, end caps, accessory brackets, small covers, shells, and decorative appearance parts for OEM and wholesale supply.
Product introduction
OEM aluminum parts and LED lighting with clear manufacturing fit
This page focuses on OEM small-to-medium aluminum die casting parts and automotive LED lighting products that match the factory’s 200T and 300T equipment. The offering is shaped for global wholesalers, importers, distributors, and OEM buyers who need practical product scope and clear project support.
Realistic Aluminum Die Casting Scope
Production is aligned with realistic 200T and 300T aluminum die casting scope for compact housings, brackets, covers, shells, lamp bodies, and other small-to-medium OEM components.
LED Lighting Product Programs
The product mix includes automotive LED lights, motorcycle LED lights, and LED work lights using aluminum housings suited to practical die casting and finishing workflows.
OEM Development Support
Projects can start from drawings, approved samples, or custom development requirements, then move through mold development, production, machining, finishing, and export packing.
Product categories
Category coverage for OEM sourcing programs
Each category below is described within realistic compact aluminum manufacturing scope. The emphasis stays on small-to-medium OEM parts, aluminum lighting housings, and decorative appearance accessories rather than oversized structural castings.
Category 01
OEM Aluminum Die Casting Parts
Compact aluminum housings, end caps, brackets, shells, lamp bodies, and cover parts produced within the practical range of 200T and 300T die casting machines.
Key applications
- Automotive and motorcycle lamp housings
- Mounting brackets and enclosure shells
- Accessory covers and end-cap components
Category 02
Custom Aluminum Hardware Parts
Custom aluminum hardware parts for distributors, aftermarket brands, and OEM programs needing compact functional parts with drilling, tapping, and surface finishing support.
Key applications
- Accessory bases and mounting parts
- Small covers, trims, and enclosure pieces
- Project-specific aluminum hardware components
Category 03
Automotive LED Lights
Automotive LED lighting products with aluminum housings and heat-dissipation-focused body structures for wholesale and private-label vehicle accessory programs.
Key applications
- Aftermarket vehicle lighting lines
- Auxiliary and utility light programs
- Private-label automotive accessory supply
Category 04
Motorcycle LED Lights
Motorcycle LED lights using compact aluminum lamp bodies suitable for replacement, styling, and accessory-focused product ranges.
Key applications
- Motorcycle accessory lighting programs
- Replacement and aftermarket lamp supply
- Compact model-specific lighting bodies
Category 05
LED Work Lights
LED work lights built around compact aluminum housings for industrial, utility, off-road, and equipment accessory channels.
Key applications
- Utility vehicle lighting
- Industrial service and maintenance lights
- Equipment and off-road accessory lines
Category 06
Decorative Brake Caliper Covers
Decorative non-load-bearing appearance covers for aftermarket styling programs, offered as compact aluminum exterior accessories only.
Key applications
- Aftermarket appearance kits
- Private-label vehicle styling accessories
- Showroom and cosmetic upgrade programs
OEM project support
Drawings, samples, mold development, production, and finishing arranged as one coordinated project flow.
OEM project support
Project development from buyer input to finished parts
HSX accepts OEM aluminum die casting parts manufacturing based on drawings, samples, or custom project requirements. The workflow is organized to move compact aluminum projects through review, mold development, production, machining, finishing, and shipment with clear buyer communication.
Drawing and Geometry Review
Start with 2D drawings, 3D files, or dimensional sketches to confirm part geometry, mounting features, and manufacturable aluminum scope.
Sample and Appearance Alignment
Approved samples or reference parts can be used to align target dimensions, appearance priorities, and assembly expectations before launch.
Mold Development
Mold development is arranged after feasibility review so compact aluminum parts can move into repeatable OEM production with clear expectations.
Die Casting and Machining
200T and 300T aluminum die casting is paired with drilling and tapping support for compact housings, brackets, covers, and hardware parts.
Finishing, Inspection, and Packing
Anodizing, powder coating, spray painting, polishing, final inspection, and export packing are coordinated to match the buyer’s project needs.
Surface finishing
Finishing options for appearance and protection
Surface treatment is coordinated around the end-market appearance, corrosion resistance, and visual quality required by each aluminum part or lighting program.
Anodizing
Used for clean metallic appearance, corrosion resistance, and consistent finish on aluminum housings, covers, and hardware parts.
Powder Coating
Suitable for durable exterior coverage on housings, brackets, decorative covers, and other compact aluminum accessory parts.
Spray Painting
Applied where the project requires color matching, branded appearance, or a specific visual finish for end-market presentation.
Polishing and Grinding
Used for surface preparation and appearance improvement before coating, painting, or final inspection on visible aluminum parts.
RFQ contact
Send your drawings, samples, or project requirements
Share the product category, drawing set, reference sample, target finish, quantity plan, and packaging requirements. HSX reviews OEM small-to-medium aluminum die casting parts, custom hardware parts, automotive LED lights, motorcycle LED lights, LED work lights, and decorative brake caliper cover inquiries for export-focused buyers.
Direct contact
Email: nicolsonhuang2020@gmail.com
WhatsApp / Phone: +86 176 6615 5283
WeChat: NicolsonHwang
Address: Huayue Road, National Eco-Industrial Park, Danzao Town, Nanhai District, Foshan, Guangdong, China
Recommended RFQ details
- Part drawings, sample photos, or reference samples
- Required finish such as anodizing, powder coating, spray painting, or polishing
- Order quantity, target market, and packaging requirements
- Application details for aluminum parts, LED lights, or decorative appearance covers
More product categories
Explore focused product pages for LED lighting and aluminum die casting projects
These product category pages help buyers find the right supply scope faster, including automotive LED lights, motorcycle LED lights, aluminum light housings, and decorative brake caliper covers.
Automotive LED Lights
OEM car LED lights, auxiliary lights, work lights, and aluminum lighting parts.
Motorcycle LED Lights
Compact motorcycle LED lights, lamp housings, brackets, and lighting accessories.
Aluminum Light Housings
Die cast aluminum lamp housings, heat-sink bodies, covers, and brackets.
Decorative Brake Caliper Covers
Non-load-bearing decorative caliper covers and automotive appearance accessories.